Shower Water Filter — User Manual

Product Overview

This filter adopts multi-stage composite filtration technology, which can effectively remove residual chlorine, rust, sediment, heavy metals, and odors from water, inhibit bacterial growth, and soften water quality.

📄 Download Original User Manual (PDF)

Installation Guide

Bathroom Shower Installation

1. Turn off the shower faucet and unscrew the original shower head.
2. Screw the water inlet of the filter (with rubber gasket) clockwise onto the shower hose, then install the shower head onto the water outlet of the filter.
3. Turn on the faucet for testing. If there is water leakage, turn off the water supply, re-tighten the connections, or replace with a spare gasket.

One-Step Installation Diagram

Kitchen Faucet Installation

1. Turn off the kitchen faucet and remove the aerator (some models require an adapter for compatibility).
2. Align the filter with the faucet interface and screw it clockwise to ensure a tight seal.
3. Turn on the faucet and rinse for 2–3 minutes until the water is clear and free of carbon powder before use.

Filter Cartridge Replacement

Bathroom Scenario: Replace every 3–6 months, or when water flow decreases or skin feels dry after bathing.

Kitchen Scenario: Replace every 2–4 months, or when water has an unusual odor or taste deteriorates.

⚠️ Warning

1. Only suitable for municipal tap water. Do not use with industrial wastewater or polluted water sources.
2. Do not use tools to forcefully twist during installation — this may damage threads or seals.
3. Operating water temperature should not exceed 60°C.
4. The kitchen model cannot replace a direct-drinking water purifier. Use with an RO reverse osmosis device if direct drinking is required.
5. In case of water leakage or abnormal water flow, turn off the water supply and check the interfaces and filter cartridge. Non-professionals are not allowed to disassemble the main body.